Electrical and Lighting Maintenance
MSC Thomas & Betts 5333 HT 3/4" Trade Liquidtight Conduit Connector Steel, Insulated, Straight Connector, Threaded Connection
Thomas & Betts 5333 HT 3/4" Trade Liquidtight Conduit Connector Steel, Insulated, Straight Connector, Threaded Connection
MSC Thomas & Betts 333KP 1, 14 x 2, 18 to 1, 10 x 2, 14 AWG, 600 Volt, Corrosion Resistant, Standard Twist on Wire Connector Yellow
Thomas & Betts 333KP 1, 14 x 2, 18 to 1, 10 x 2, 14 AWG, 600 Volt, Corrosion Resistant, Standard Twist on Wire Connector Yellow
MSC Thomas & Betts TV10-8F-XV #8 Stud, 12 to 10 AWG Compatible, Partially Insulated, Crimp Connection, Standard Fork Terminal 0.327" Fork Width, Vinyl Insulation, Yellow, 1.004" Overall Length, 600 Volts, 0.039" Thick, Copper Contacts
Thomas & Betts TV10-8F-XV #8 Stud, 12 to 10 AWG Compatible, Partially Insulated, Crimp Connection, Standard Fork Terminal 0.327" Fork Width, Vinyl Insulation, Yellow, 1.004" Overall Length, 600 Volts, 0.039" Thick, Copper Contacts
Grainger Wire Rope Stud 3/8 -24 RH Thread 1/4 in
The Grainger Approved Wire Rope Stud is a galvanized steel wire rope stud with a 1/2" diameter and 16" overall length. It has a working load limit of 1,650 lbs and is designed for general purpose use in wire rope applications. The stud features a forged eyelet on one end and is threaded on the other end to accept a nut. It can be used to create an endless wire rope sling or as an end termination. This wire rope stud is galvanized for corrosion resistance. With its high working load and corrosion resistant finish, this wire rope stud is a versatile option for creating wire rope assemblies.
Grainger Wire Rope Locking Stud RH Thread 1/16 in
The Loos Wire Rope Locking Stud is a 1/16" diameter stud designed for wire rope applications. It is made from grade 5 titanium with a tensile strength of 120,000 psi. The stud has a head diameter of 3/16" and an installed height of 1/4". It can be used with 1x7 and 7x7 wire rope constructions. The stud is installed using a standard stud gun and features a locking collar to prevent loosening under vibration. It provides a secure termination point for wire rope in a variety of industrial lifting, rigging and cable railing applications.
Grainger Wire Rope Locking Stud LH Thread 1/16 in
The Loos & Co. Wire Rope Thimble is made of galvanized steel with a 3/32 inch inside diameter. It is designed to fit 3/32 inch wire rope and protect it from wear. The thimble has a closed eye and is used to form eyes on wire rope for use with shackles, hooks, and other hardware. It provides a hard wearing surface to prevent crushing and deformation of the wire rope. This wire rope thimble is galvanized for corrosion resistance. It meets military specification MIL-T-781J and is made in the USA by Loos & Co., a leading manufacturer of wire rope fittings.
MSC Made in USA R4B-10 16-14 AWG Fully Insulated Crimp Connection Circular Ring Terminal #10 Stud, Copper Contact
Made in USA R4B-10 16-14 AWG Fully Insulated Crimp Connection Circular Ring Terminal #10 Stud, Copper Contact
Grainger Wire Rope Stud 1/4 -28 RH Thread 5/32 in
The Grainger 16X694 is a 3M Scotch-Brite General Purpose Hand Pad that features an open web construction with non-scratching fibers for cleaning and scouring. It has a 6 inch by 9 inch size and comes in a pack of 10 pads. The pads have a medium duty abrasiveness level and are ideal for cleaning pots, pans, dishes, counters, appliances, tools, and more. The open web design allows dirt and grime to collect in the pad for more effective scrubbing. It can be used for wet or dry cleaning applications.
Grainger Level Mount Swivel Stud 5/8-11 2-1/2 in.
The Level It Male End Leveling Mount Swiveling TV Wall Mount Bracket by Level It is a heavy duty full motion articulating TV wall mount that can support most 37-70 inch TVs weighing up to 132 lbs. It is constructed from reinforced steel and has a scratch resistant powder coated finish. The mount allows for +/-15° of tilt and 180° of swivel to reduce glare and has adjustable viewing angles. It extends up to 20.5 inches from the wall and has integrated cable management for a clean look. The mount is VESA compliant and fits most VESA patterns from 200x200mm to 600x400mm. It includes all necessary mounting hardware for wood stud and concrete installation.
MSC Made in USA R4C-38 12-10 AWG Fully Insulated Crimp Connection Circular Ring Terminal 3/8" Stud, Copper Contact
Made in USA R4C-38 12-10 AWG Fully Insulated Crimp Connection Circular Ring Terminal 3/8" Stud, Copper Contact
MSC ACI 107675 6 AWG, Partially Insulated, Crimp Electrical Wire Ferrule 12mm Long x 6.2mm Diameter Pin, 22.2mm Overall Length
ACI 107675 6 AWG, Partially Insulated, Crimp Electrical Wire Ferrule 12mm Long x 6.2mm Diameter Pin, 22.2mm Overall Length
Grainger Wire Rope Stud 3/8 -24 LH Thread 1/4 in
The Grainger 3/8"-24 swage stud fittings for wire rope are high-strength forged steel fittings used to terminate wire rope. They feature a swaged end that grips the wire rope for a secure connection. The stud end has coarse 3/8"-24 threads to accept various attachments. Load ratings vary by stud length from 5,400 lbs to 9,000 lbs. Available in multiple stud lengths from 1-1/4" to 3" for versatility. Zinc plating resists corrosion. Meets military, federal, and other specs. Quality US-made fittings for heavy duty wire rope applications.
